DMTimer 1ms
www.ti.com
20.2.5.18 TCVR Register (offset = 50h) [reset = 0h]
TCVR is shown in Figure 20-52 and described in Table 20-53.
This register is used for 1ms tick generation. The TCVR register defines whether next value loaded in
TCRR will be the sub-period value or the over-period value.
Figure 20-52. TCVR Register
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
COUNTER_VALUE
R/W-0h
LEGEND: R/W = Read/Write; R = Read only; W1toCl = Write 1 to clear bit; -n = value after reset
Table 20-53. TCVR Register Field Descriptions
Bit Field Type Reset Description
31-0 COUNTER_VALUE R/W 0h
The value of CVR counter.
3618
Timers SPRUH73H–October 2011–Revised April 2013
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated
To Next Page
Loading...
