Texas Instruments AM335 Series Technical Reference Manual

EDMA3 Registers www.ti.com
11.4.1.6.5 Event Enable Registers (EER, EERH)
The EDMA3CC provides the option of selectively enabling/disabling each event in the event registers
(ER/ERH) by using the event enable registers (EER/EERH). If an event bit in EER/EERH is set (using the
event enable set registers, EESR/EESRH), it will enable that corresponding event. Alternatively, if an
event bit in EER/EERH is cleared (using the event enable clear registers, EECR/EECRH), it will disable
the corresponding event.
The event registers latch all events that are captured by EDMA3CC, even if the events are disabled
(although EDMA3CC does not process it). Enabling an event with a pending event already set in the event
registers enables the EDMA3CC to process the already set event like any other new event. The
EER/EERH settings do not have any effect on chained events (CER.En/CERH.En = 1) and manually set
events (ESR.En/ESRH.En = 1).
The EER is shown in Figure 11-78 and described in Table 11-62. Th EERH is shown in Figure 11-79 and
described in Table 11-63.
Figure 11-78. Event Enable Register (EER)
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
E31 E30 E29 E28 E27 E26 E25 E24 E23 E22 E21 E20 E19 E18 E17 E16
R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
E15 E14 E13 E12 E11 E10 E9 E8 E7 E6 E5 E4 E3 E2 E1 E0
R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0
LEGEND: R = Read only; -n = value after reset
Table 11-62. Event Enable Register (EER) Field Descriptions
Bit Field Value Description
31-0 En Event enable for events 0-31.
0 Event is not enabled. An external event latched in the event register (ER) is not evaluated by the
EDMA3CC.
1 Event is enabled. An external event latched in the event register (ER) is evaluated by the EDMA3CC.
Figure 11-79. Event Enable Register High (EERH)
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
E63 E62 E61 E60 E59 E58 E57 E56 E55 E54 E53 E52 E51 E50 E49 E48
R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
E47 E46 E45 E44 E43 E42 E41 E40 E39 E38 E37 E36 E35 E34 E33 E32
R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0
LEGEND: R = Read only; -n = value after reset
Table 11-63. Event Enable Register High (EERH) Field Descriptions
Bit Field Value Description
31-0 En Event enable for events 32-63.
0 Event is not enabled. An external event latched in the event register high (ERH) is not evaluated by the
EDMA3CC.
1 Event is enabled. An external event latched in the event register high (ERH) is evaluated by the
EDMA3CC.
976
Enhanced Direct Memory Access (EDMA) SPRUH73H–October 2011–Revised April 2013
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated

Texas Instruments AM335 Series Specifications

General

Brand	Texas Instruments
Model	AM335 Series
Category	Computer Hardware
Language	English