www.ti.com
USB Registers
16.5.7.5 FDBSC2 Register (offset = 28h) [reset = 0h]
FDBSC2 is shown in Figure 16-281 and described in Table 16-295.
Figure 16-281. FDBSC2 Register
31 30 29 28 27 26 25 24
FDBQ11_STARVE_CNT
R-0
23 22 21 20 19 18 17 16
FDBQ10_STARVE_CNT
R-0
15 14 13 12 11 10 9 8
FDBQ9_STARVE_CNT
R-0
7 6 5 4 3 2 1 0
FDBQ8_STARVE_CNT
R-0
LEGEND: R/W = Read/Write; R = Read only; W1toCl = Write 1 to clear bit; -n = value after reset
Table 16-295. FDBSC2 Register Field Descriptions
Bit Field Type Reset Description
31-24 FDBQ11_STARVE_CNT R-0 0 This field increments each time the Free Descriptor/Buffer Queue 11
is read while it is empty via the CPPI DMA.
This field is cleared when read via the cpu.
23-16 FDBQ10_STARVE_CNT R-0 0 This field increments each time the Free Descriptor/Buffer Queue 10
is read while it is empty via the CPPI DMA.
This field is cleared when read via the cpu.
15-8 FDBQ9_STARVE_CNT R-0 0 This field increments each time the Free Descriptor/Buffer Queue 9
is read while it is empty via the CPPI DMA.
This field is cleared when read via the cpu.
7-0 FDBQ8_STARVE_CNT R-0 0 This field increments each time the Free Descriptor/Buffer Queue 8
is read while it is empty via the CPPI DMA.
This field is cleared when read via the cpu.
Queue_Manager_Free_Descriptor_Buffer_Starvation_Count
Register 2
2113
SPRUH73H–October 2011–Revised April 2013 Universal Serial Bus (USB)
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated
To Next Page
Loading...
Need help?
General
