Texas Instruments AM335 Series

LCD Registers www.ti.com
Table 13-37. IRQENABLE_SET Register Field Descriptions (continued)
Bit Field Type Reset Description
1 recurrent_raster_done_en R/W 0h Raster Done Interrupt Enable Set
_set Read indicates enabled (mask) status
0 = Disabled
1 = Enabled
Writing 1 will set interrupt enable
Writing 0 has no effect
0 done_en_set R/W 0h Raster or LIDD Frame Done (shared, depends on whether Raster or
LIDD mode enabled) Interrupt Enable Set Read indicates enabled
(mask) status 0 = disabled 1 = enabled Writing 1 will set interrupt
enable
1158
LCD Controller SPRUH73H–October 2011–Revised April 2013
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated