LCD Registers
www.ti.com
Table 13-38. IRQENABLE_CLEAR Register Field Descriptions (continued)
Bit Field Type Reset Description
1 recurrent_raster_done_en R/W 0h Raster Done Interrupt Enable Clear
_clr Read indicates enabled status
0 = Disabled
1 = Enabled
Writing 1 will clear interrupt enable
Writing 0 has no effect
0 done_en_clr R/W 0h Raster or LIDD Frame Done (shared, depends on whether Raster or
LIDD mode enabled) Interrupt Enable Clear
Read indicates enabled status
0 = disabled 1 = enabled Writing 1 will clear interrupt enable
Writing 0 has no effect
1160
LCD Controller SPRUH73H–October 2011–Revised April 2013
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated
To Next Page
Loading...
Need help?
General
