EasyManuals Logo

Texas Instruments AM335 Series Technical Reference Manual

Texas Instruments AM335 Series
4161 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1212 background imageLoading...
Page #1212 background image
Functional Description
www.ti.com
Had a length of 64 to rx_maxlen bytes inclusive
Had no CRC error, alignment error or code error.
See the Rx Align/Code Errors and Rx CRC errors statistic descriptions for definitions of alignment, code
and CRC errors. Overruns have no effect upon this statistic.
14.3.2.20.1.3 Multicast Rx Frames (Offset = 8h)
The total number of good multicast frames received on the port. A good multicast frame is defined to be:
Any data or MAC control frame which was destined for any multicast address other than
0xFFFFFFFFFFFF
Had a length of 64 to rx_maxlen bytes inclusive
Had no CRC error, alignment error or code error
See the Rx Align/Code Errors and Rx CRC errors statistic descriptions for definitions of alignment, code
and CRC errors. Overruns have no effect upon this statistic.
14.3.2.20.1.4 Pause Rx Frames (Offset = Ch)
The total number of IEEE 802.3X pause frames received by the port (whether acted upon or not). Such a
frame:
Contained any unicast, broadcast, or multicast address
Contained the length/type field value 88.08 (hex) and the opcode 0x0001
Was of length 64 to rx_maxlen bytes inclusive
Had no CRC error, alignment error or code error
Pause-frames had been enabled on the port (tx_flow_en = 1).
The port could have been in either half or full-duplex mode.
See the Rx Align/Code Errors and Rx CRC errors statistic descriptions for definitions of alignment, code
and CRC errors. Overruns have no effect upon this statistic.
14.3.2.20.1.5 Rx CRC Errors (Offset = 10h)
The total number of frames received on the port that experienced a CRC error. Such a frame:
Was any data or MAC control frame which matched a unicast, broadcast or multicast address, or
matched due to promiscuous mode
Was of length 64 to rx_maxlen bytes inclusive
Had no code/align error,
Had a CRC error
Overruns have no effect upon this statistic.
A CRC error is defined to be:
A frame containing an even number of nibbles
Failing the Frame Check Sequence test
14.3.2.20.1.6 Rx Align/Code Errors (Offset = 14h)
The total number of frames received on the port that experienced an alignment error or code error. Such a
frame:
Was any data or MAC control frame which matched a unicast, broadcast or multicast address, or
matched due to promiscuous mode
Was of length 64 to rx_maxlen bytes inclusive
Had either an alignment error or a code error
Overruns have no effect upon this statistic.
1212
Ethernet Subsystem SPRUH73HOctober 2011Revised April 2013
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated

Table of Contents

Other manuals for Texas Instruments AM335 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Texas Instruments AM335 Series and is the answer not in the manual?

Texas Instruments AM335 Series Specifications

General IconGeneral
BrandTexas Instruments
ModelAM335 Series
CategoryComputer Hardware
LanguageEnglish

Related product manuals