www.ti.com
Ethernet Subsystem Registers
Table 14-190. MACCONTROL Register Field Descriptions (continued)
Bit Field Type Reset Description
0 FULLDUPLEX R/W 0h Full Duplex mode - Gigabit mode forces fullduplex mode regardless
of whether the fullduplex bit is set or not.
The FULLDUPLEX_OUT output is the value of this register bit
0 - half duplex mode
1 - full duplex mode
1415
SPRUH73H–October 2011–Revised April 2013 Ethernet Subsystem
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated