www.ti.com
USB Registers
Table 16-86. USB0RXMODE Register Field Descriptions (continued)
Bit Field Type Reset Description
RXMAXP and RXCOUNT are both registers within the Mentor
controller.
* The XDMA will continue to request RX packets from the Mentor
controller until a short packet is received.
* When the CPPI is configured for chaining mode, the Buffer
Descriptor sizes must be integer multiples of the RXMAXP size.
* Transmit mode is not supported.
* USB0 or USB1 Auto Req register should be set to AUTO REQ
ALWAYS.
1831
SPRUH73H–October 2011–Revised April 2013 Universal Serial Bus (USB)
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated
To Next Page
Loading...
Need help?
General
