www.ti.com
USB Registers
Table 16-152. UTMI_INTERFACE_CNTL_2 Register Field Descriptions (continued)
Bit Field Type Reset Description
7 TXDAT R/W 0h
Override value for signal TXDAT
6 FSLSSERIALMODE R/W 0h
Override value for signal FSLSSERIALMODE
5 TXENABLEN R/W 0h
Override value for signal TXENABLEN
4-1 Reserved R/W 0h
0 sig_bypass_suspendmpul R/W 0h If the suspend signal is asserted for very short-time, it is pulse
se_incr extended so that all the sampling logic samples it reliably.
This pulse extention can be bypassed by writin a '1' to this bit ( so
that IP's behaviour is similar to previous versions)
1913
SPRUH73H–October 2011–Revised April 2013 Universal Serial Bus (USB)
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated
To Next Page
Loading...
Need help?
General
