www.ti.com
Multimedia Card Registers
Table 18-44. SD_FE Register Field Descriptions (continued)
Bit Field Type Reset Description
18 FE_CEB W 0h
Force Event Command end bit error
0x0 = No effect; no interrupt
0x1 = Interrupt forced.
17 FE_CCRC W 0h
Force Event Comemand CRC error
0x0 = No effect; no interrupt
0x1 = Interrupt forced.
16 FE_CTO W 0h
Force Event Command Timeout error
0x0 = No effect; no interrupt
0x1 = Interrupt forced.
15-8 Reserved R 0h
7 FE_CNI W 0h
Force Event Command not issue by Auto CMD12 error
0x0 = No effect; no interrupt
0x1 = Interrupt forced.
6-5 Reserved R 0h
4 FE_ACIE W 0h
Force Event Auto CMD12 index error
0x0 = No effect; no interrupt
0x1 = Interrupt forced.
3 FE_ACEB W 0h
Force Event Auto CMD12 end bit error
0x0 = No effect; no interrupt
0x1 = Interrupt forced.
2 FE_ACCE W 0h
Force Event Auto CMD12 CRC error
0x0 = No effect; no interrupt
0x1 = Interrupt forced.
1 FE_ACTO W 0h
Force Event Auto CMD12 timeout error
0x0 = No effect; no interrupt
0x1 = Interrupt forced.
0 FE_ACNE W 0h
Force Event Auto CMD12 not executed.
0x0 = No effect; no interrupt.
0x1 = Interrupt forced.
3441
SPRUH73H–October 2011–Revised April 2013 Multimedia Card (MMC)
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated