EasyManuals Logo

Texas Instruments AM335 Series Technical Reference Manual

Texas Instruments AM335 Series
4161 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4106 background imageLoading...
Page #4106 background image
Functional Description
www.ti.com
Table 26-7. SYSBOOT Configuration Pins[4]
SYSBOOT[15:14 SYSBOOT[13:12 SYSBOOT[11:10 SYSBOOT[9] SYSBOOT[8] SYSBOOT[7:6] SYSBOOT[5] SYSBOOT[4:0] Boot Sequence
] ] ]
For all boot For all boot For XIP boot: For EMAC For all boot
For XIP boot: For NAND and
modes: Crystal modes: Set to Bus width boot: PHY modes:
NANDI2C
Muxed or non-
Frequency 00b for normal mode CLKOUT1
boot: NAND
muxed device
operation output
ECC
For NAND boot:
enabled/disable
For Fast
d on
must be 00b
External Boot:
XDMA_EVENT
must be 0b
_INTR0
CONTROL_ CONTROL_ CONTROL_ CONTROL_ CONTROL_ CONTROL_ CONTROL_ CONTROL_
STATUS[23:22] STATUS[21:20] STATUS[19:18] STATUS[17] STATUS[16] STATUS[7:6] STATUS[5] STATUS[4:0]
1st 2nd 3rd 4th
00000b Reserved
00b Don't care for Don't care for 00001b UART0 XIP w/ MMC0 SPI0
00b = 19.2MHz For XIP boot: 0 = 8-bit device 0 = CLKOUT1
(all other values ROM code[3] ROM code WAIT[1]
disabled
01b = 24MHz 00b = non-muxed 1 = 16-bit
reserved) (MUX2)[2
device device 1 = CLKOUT1
10b = 25MHz
]
enabled
10b = muxed
11b = 26MHz
device
x1b = reserved
00b For NAND boot: Don't care for Don't care for 00010b UART0 SPI0 NAND NANDI2C
00b = 19.2MHz 0 = ECC done 0 = CLKOUT1
(all other values must be 00b ROM code ROM code
by ROM disabled
01b = 24MHz
reserved)
1 = ECC 1 = CLKOUT1
10b = 25MHz
handled by enabled
11b = 26MHz
NAND
00b Don't care for Don't care for 00011b UART0 SPI0 XIP MMC0
00b = 19.2MHz For XIP boot: 0 = 8-bit device 0 = CLKOUT1
(all other values ROM code ROM code (MUX2)[2
disabled
01b = 24MHz 00b = non-muxed 1 = 16-bit
reserved) ]
device device 1 = CLKOUT1
10b = 25MHz
enabled
10b = muxed
11b = 26MHz
device
x1b = reserved
00b Don't care for 00100b UART0 XIP w/ MMC0 NAND
00b = 19.2MHz For XIP boot: 0 = ECC done 0 = 8-bit device 0 = CLKOUT1
(all other values ROM code WAIT[1]
by ROM disabled
01b = 24MHz 00b = non-muxed 1 = 16-bit
reserved) (MUX1)
device 1 = ECC device 1 = CLKOUT1
10b = 25MHz
handled by enabled
10b = muxed
11b = 26MHz
NAND
device
x1b = reserved
For NAND boot:
must be 00b
4106
Initialization SPRUH73HOctober 2011Revised April 2013
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated

Table of Contents

Other manuals for Texas Instruments AM335 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Texas Instruments AM335 Series and is the answer not in the manual?

Texas Instruments AM335 Series Specifications

General IconGeneral
BrandTexas Instruments
ModelAM335 Series
CategoryComputer Hardware
LanguageEnglish

Related product manuals